.. _read_balancer:

=======================================
Operating the Read (Primary) Balancer
=======================================

You might be wondering: How can I improve performance in my Ceph cluster?
One important data point you can check is the ``read_balance_score`` on each
of your replicated pools.

This metric, available via ``ceph osd pool ls detail`` (see :ref:`rados_pools`
for more details) indicates read performance, or how balanced the primaries are
for each replicated pool. In most cases, if a ``read_balance_score`` is above 1
(for instance, 1.5), this means that your pool has unbalanced primaries and that
you may want to try improving your read performance with the read balancer.

Online Optimization
===================

Enabling
--------

To enable automatic read balancing, you must turn on the *balancer module*
(enabled by default in new clusters) and set the mode to ``read`` or ``upmap-read``:

.. prompt:: bash $

   ceph balancer on
   ceph balancer mode <read|upmap-read>

Both ``read`` and ``upmap-read`` mode make use of ``pg-upmap-primary``. In order
to use ``pg-upmap-primary``, the cluster cannot have any pre-Reef clients.

If you want to use a different balancer or if you want to make your
own custom ``pg-upmap-primary`` entries, you might want to turn off the balancer in
order to avoid conflict:

.. prompt:: bash $

   ceph balancer off

To allow use of the new feature on an existing cluster, you must restrict the
cluster to supporting only Reef (and newer) clients.  To do so, run the
following command:

.. prompt:: bash $

   ceph osd set-require-min-compat-client reef

This command will fail if any pre-Reef clients or daemons are connected to
the monitors. To see which client versions are in use, run the following
command:

.. prompt:: bash $

   ceph features

Balancer Module
---------------

The `balancer` module for ``ceph-mgr`` will automatically balance the number of
primary PGs per OSD if set to ``read`` or ``upmap-read`` mode. See :ref:`balancer`
for more information.

Offline Optimization
====================

Primaries are updated with an offline optimizer that is built into the
:ref:`osdmaptool`.

#. Grab the latest copy of your osdmap:

   .. prompt:: bash $

      ceph osd getmap -o om

#. Run the optimizer:

   .. prompt:: bash $

      osdmaptool om --read out.txt --read-pool <pool name> [--vstart] 

   It is highly recommended that you run the capacity balancer before running the
   balancer to ensure optimal results. See :ref:`upmap` for details on how to balance
   capacity in a cluster.

#. Apply the changes:

   .. prompt:: bash $

      source out.txt

   In the above example, the proposed changes are written to the output file
   ``out.txt``. The commands in this procedure are normal Ceph CLI commands
   that can be run in order to apply the changes to the cluster.

   If you are working in a vstart cluster, you may pass the ``--vstart`` parameter
   as shown above so the CLI commands are formatted with the `./bin/` prefix.

   Note that any time the number of pgs changes (for instance, if the pg autoscaler [:ref:`pg-autoscaler`]
   kicks in), you should consider rechecking the scores and rerunning the balancer if needed.

To see some details about what the tool is doing, you can pass
``--debug-osd 10`` to ``osdmaptool``. To see even more details, pass
``--debug-osd 20`` to ``osdmaptool``.

Troubleshooting
===============

Removing pg-upmap-primary mappings
------------------------------------

For scenarios where you need to manually remove ``pg-upmap-primary`` mappings, Ceph provides the following
developer-level commands. These commands should be used with caution, as they directly modify
primary PG mappings and can impact read performance (this excludes any data movement).

.. note::

  Users affected by `#66867 <https://tracker.ceph.com/issues/66867>`_ or `#61948 <https://tracker.ceph.com/issues/61948>`_
  may find these commands useful when dealing with unexpected ``pg-upmap-primary`` behavior.

To remove a specific ``pg-upmap-primary`` mapping, use:

.. prompt:: bash $

   ceph osd rm-pg-upmap-primary <pgid>

If you need to clear **all** ``pg-upmap-primary`` mappings in your cluster, you may use:

.. prompt:: bash $

   ceph osd rm-pg-upmap-primary-all